Products

These mechanically working screens are used to take out the coarse material from waste water. They are preferred because of their compact design, ease of assemble to channels of all varying levels, their effectiveness at high flow rates and their ease of operation.

These screens are used in low level channels . Coarse material that are caught on screen material are scraped upside through channel base with the help of rake.

These manuel screens are used to take out coarse materials even before entering the treatment system and they don’t have any mechanical parts. They can ben used as a first stage equipment on system input as well as by-bass screen. They are prefferred because of their capability of maintanence on top of water level and economical operation costs.

They are amongst the mostly preferred screens because of their ease of operation and their precise screening capacities. They can be designed as closed top to prevent any odor. Stainless screens are cleaned with pressured water coming from nozzles.

They are a type of fine screens that are assembled to the pipe lines. They can be designed as externally and internally fed. Wedge wire surface minimizes the risk of occlusion. They are prefferred because of their energy efficiency and their efficient results in high flow rates.

They are a type of fine screens that are assembled to the pipe lines. They can be designed as externally and internally fed. Wedge wire surface minimizes the risk of occlusion. They are prefferred because of their energy efficiency and their efficient results in high flow rates.

This fine screen is mostly used in textile, paper, food endustries. It is efficient at taking away solid particles from water. Solid particles coming to the screen by the slowed down water are filtered with the help of wedge wire surface. Particles that are collected at the front side of the screen are dragged down by the downward flow of the water. This screen doesn’t have any electrical component and it works manually.

These equipments are used in pre treatment systems for seperating sand from water. Sand that is collected at the sedimentation receptacle is discharced with the help of spiral conveyor. They are prefferred because of their effective seperation performance, long service life and low maintenance costs.

These equipments are used in water and waster water treatment processes for preparing chemical solutions at the coagulation units. They can be designed according to the tank size and chemical density used.

These equipments are used in water and waster water treatment processes for preparing chemical solutions at the flocculation units. They can be designed according to the tank size and chemical density used.

These Gates are used for flow control in the channel and they are produced in rectangular shape with sizes considering the channel size. They can be designed as manually controlled or electrically actuated.

These valves make it possible to move water through the vertical tubes with a vertically moving part. It is used adjust the levels in tanks. They can be controlled manually or with electrical actuaors.

These are plates that are used for increasing the efficiency of settling of solid particles in tanks. They are made frop CTP and PVC. They increase the surface area and optimize the sedimentation of sludge.

These transmission chains are produced for scraper systems that use non metal chains. They are embedded with metal plate support to increase the pulling resistance and to decrease the risk of plastic deformation, in addition to that GRP material eliminates the corrosion factor.

This equipment is used for aerating and mixing the water mostly in biological reactors. It’s working principle depends on a pump sucking the water from bottom and splashing it to a plate on a the water surface so the water is aerated. Vertical shaft aerators can be mounted on concrete or steel constructions as well as on pantoons. They are preferred because of their efficient oxygen transfer rates.

This equipment is used for water aeration and mixing purposes in the tanks. They can be mounted on non stationary chassis or pantoons. A jet nozzle that is partly inside the water in an angular position takes the air from outside and transfers it to the spiral propeller which sends the air into the water and creates aeration.

Rotating scrapers are used in circular shaped tanks for scraping the sludge that is sedimented to the bottom of the tank. Scraper blades that is connected to the circular rotating bridge scrapes the sludge to the center of the tank and it is removed from water. Driving motor is placed on side part of the moving bridge.

This scraper is used on rectangular shaped tanks. Scraper blades that are connected to the linearly moving bridge scrapes the sludge to one side of the tank into a sludge pit.

This scraper is used on rectangular shaped tanks. Scraper blades that are connected to the linearly moving bridge scrapes the sludge to one side of the tank into a sludge pit.

Sludge thickening is a process that aims to reduce the amount of water in sludge. Thickening processes main goal is to prepare the sludge for sludge dewatering process. Sludge thickener systems are designed in sizes that are appropriate for the waste water plants capacity and they can be driven from sides or from center according to the size of the tank.

This equipment is used for dewatering the sludge that is obtained from waste water treatment. Sludge is pressed between filter plates and cloths and it’s water is taken to water decharge line of the equipment. When plates are decompressed solid cake is obtained.

This equipment is used dewatering the sludge that is obtained from the waste water treatment. Sludge that is compressed between drums using belts are scraped with a cake scraper into containers. Amout of drums are chosen accoring to the properties of the sludge that is fed to the belt pres. It’s prefferred because of it’s continuous working capability.

Automatic polyelectrolite prepration units are used for automatically preparing the desired mix of polyelectrolyte solution that will be used in sludge dewatering units of waste water treatment systems.

It’s a domestic wastewater treatment unit designed and manufactured for small residential areas.
It is a compact facility that works with reliable, proven process, treatment equipment and operates with high efficiency.